Filter
Top Products
Set Up the Machine
Plug in the Machine and Switch on the Power
Power supply plug
Power
swlIch
\
NOTE.
PIug
connector
Machine
plug
Before inserting the plug into your
machine, be sure the power sw_tch is
OFF
I, Check your outlet to be sureitis a 110to !20
Volt AC outlet.
2, Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way.
3. Insert the power supply plug into the outlet.
Sewmg ligh!
Power swltch %
4. Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATUR E:
Your machine wil! not operate unless the
lighttpower switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
o Foot Control Use
Fool c/ontro!
J
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your toot.
To decrease speed, release your foot pres-
sure slightly,
NOTE:
The foot control is sensitive and
win increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewmg speed to
your taste and needs,