Filter
Top Products
To Snap On the Presser Foot:
t. Place the presser foot so the hori-
zontal pin on the foot lies iust
under the groove of the foot
holder,
2. Lower the presser foot holder to
lock the presser foot in place.
NOTE:
If you do not hear the
presser foot snap m place,
press down on the presser
foot holder firmly until you
hear the snap.
• Presser Foot Types
Zigzag Foot
A: Zigzag toot
Use this foot for
stitching.
Uses:
both straight and zigzag
Zigzag stitching (see page 3_0),
Bar tacking (see page 32),
Button sewing (see page 3_44),
Overcasting stitch (see page 3__5),
Rick-rack stretch (see page 35),
Three-step zigzag {see page 36),
Serging (see page 37),
Overcast stretch (see page 3__7),
Blind hemming (see page 38),
Lace work (see page 40),
Two-point shell stitching
(see page 44),
Smocking (see page 455),
Stretch patching (see page 45__),
Fagoting (see page 46),
Herring bone stretch (see page 4_6),
Elastic stretch (see page 47),
Box stitching (see page 47).
Strmght Foot
f
H: Straight toot
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 2__7),
Topstitching {see page 2_88),
Straight stretch (see page 29).
11