Filter
Top Products
Set the Machine
Stitch w_dth
contro! 2 to 3
_ 2 3 4
Top thread tension
contro_ 2 to 6
A: Zigzag foot
Stitch length
control orange
zone
2
Stretch Stitch
L_ght
Weight
Fabric
Heavy
Weight
Fabric
1/4"
1/4"
1, Finish the raw edge of your hem any way you desire. (see overcasting page 3.5).
2. Measure, turn up your hem and pin.
NOTE. For light wmght fabrics, you may need a double fold,
3. Fotd the material (bottom side out) on the edge to be stitched, as shown, leaving t/4" of the finished hem edge
showing.
4. Place garment under presser foot in such a manner that straight stitches will be sewn on extended edge. The zigzag
stitch should just catch the fold of the garment.
5. After hemming, press both sides of the finished hem. The top s_de of the garment will show only the blind stitches.
38