Filter
Top Products
Prepare the Bobbin
o To Remove the Bobbin from the Machine
!. Gently push down on the bobbin cover plate and slide
it towards you.
2. Set aside.
3. Lift out the bobbin, as shown.
o Wind the Bobbin
Bobbin winding spindle
Clutch
1. Put your spool of thread onto spool pin, with the thread winding in the direction
sh own.
2. Pull the clutch away from the machine to stop the needle from moving while you
wtnding the bobbin.
3o Draw thread from spool through bobbin winder tension disc as shown.
4. Place the threaded bobbin on the bobbin winding spindle so that the thread comes
out on top.
5. Push the bobbin winder spindle to the right until it elicks_
6. Holding onto end of thread, depress the foot control.
7. When the bobbin is slightly filled, stop the machine and clip the thread coming from
the bobbim
8. Slowly start the machine again and wind the thread until the bobbtn stops.
9. Push the bobbin wlnder spindle to the left and clip the thread.
10. Remove the bobbin.
11. Push in the clutch for normal sewing operation.
15