Filter
Top Products
o Sew a Button
Set the Machine
Top thread tenston
control 2 to 6
Stitch width control
Must be adiu sted
_ 2 3 4
Stitch length control
Any number {not
necessary to adiust )
4
Stretch Stitch
A: Zigzag toot
Darning pta
Use the darning plate for button sewmg (see page 28).
t.
21
3.
Match the center of the button holes to the center of the slot on the presser
foot.
Adjust the stitch width so that needle wilt drop in each hole.
Lower the foot to hold the button in place.
Turn the hand wheel by hand so that needle will enter either hole of the
button.
4. Stitch several times.
,_, ,..................... J
To strengthen the shank, cut the
threads leaving a 8" tail. Bring the
needle thread down through the hole
m the button and wind it around the
shank.
Draw the thread to the bottom side
and knot,
34