Filter
Top Products
I I il
LEFT HOLE
OF
BUTTON
PRESSER
FOOT
I
STRAIGHT
SEAMLINE
I
BUTTON
BUTTON SEWING
SIitch Selector- /VVVV_
SIitch Width - Adjust to Button Size
USe Feed Cover Plate and Clear Plastic
Satin Stitch Foot.
11,
2_
4_
5.i
6_
Position the button on fabric with clear
tape.
Center the left hole of button between
straight seamline and the left edge of
needle slot of foot and lower foot to hold
the button securely.
Turn hand wheel manually until needle
point is just above button.
Adjust stitch width control so needle will
enter right hole of the button.
Turn hand wheel again by hand so needle
enters second hole. Readjust stitch width
if necessary. Stitch a number of times.
Finish sewing with an extra two inches of
thread remaining. Draw these threads to
reverse side of garment and tie.
V_hen sewing a flat button, place needle or
pi_ between holes of button as shown to
brbvide flexibility for buttoning.
35