Filter
Top Products
_ I
DARNING
SETTINGS
Stitch Length - 8 to 10
Pressure Regulator - 0 (DARN)
Zigzag foot or square automatic buttonhole
foot
Stretch fabric between embroidery hoops
with hole centered. Lower presser bar and
sew at a slow speed moving fabric back and
forth with a steady rhythm to cover darning
area. When it is covered, turn fabric 1/4 a
turn and sew layer of stitching across first
layer.
If fabric is thin or badly damaged in hole area,
you may want to put a separate piece under
the hole for reinforcement.
TEMPORARY SEWING BY
MACHINE
Regular basting by machine is easy-simply
use straight stitching wirth longest available
length setting. And your machine has a free
basting method for very long stitches that
sometimes can be used for "marking".
FREE BASTING METHOD
SETTINGS
Basting switch - turn on
Pressure regulator - 0 (DARN) or 1
Use feed cover plate.
Tap the foot control and the machine will
take one stitch and stop automatically with
the needle in the up position. Holding the
fabric in both hands, pull it back to the
required stitch length.
Repeat this process, tapping down on the
foot control and guiding the fabric with your
hands.
I
i
Regular Basting
Free Method
_j ii i
!
!
electronic
0 0
30