Filter
Top Products
. WARNJ.G
Electrical Shock itazard
DO NOT plug into electrical supply
until assembly is complete, Failure
to do so could result in electrical
shock or injury,
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
your new Kenmore vacuum.
WANDS
Slide wands
together until
wand button
snaps into place.
Turn wand button
to the slotted area
of the wand swiv-
el.
The swivel allows
you to turn the
handfe to the left
side to reach far-
ther under low
furniture.
Wand
Swivel --
Cord
Holder /
POWER-MATE
1. Insert wands into Power-Mate _ until the
wand buttons snaps into place.
.... Raised Mate_plug and
_-_'_ " a cord as shown,
DO NOT force,
Raised area of
_tm'_ lug must be
toward hand,
3. Secure cord into
cord holder on
wand swivel_
To remove: Disconnect cord and step on
wand release pedal, then pull up on wands,
Handle
Handle
Buttot
Wand
Swivel
POWER-
MATEe
Wand
Release Pedal