Filter
Top Products
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting,
TO CHECK BRUSHES
-- When brushes
are worn to the
level of the base
support bars,
replace the
brush dowel
Base Support Bars
i
TO REPLACE BRUSH DOWEL
1. Remove Power-Mate s cover, belt and
brush assembly. See "To Remove Belt" in
BELT CHANGING AND BRUSH
CLEANING.
2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces
from ends of brush assembly..
3. Reassemble brush assembly° To line up
screw holes in dowel, sprocket and end
brush, be sure the brush portion of end
brush lines up with brushes on brush dowel.
4. Replace belt, brush assembly, Power-
Mateecover, light bulb and light cover. See
"To replace belt" in BELT CHANGING AND
BRUSH CLEANING.
Brush
Sprocket End
Flange Brush
End Screw
Cap Agitator Unit
End
Cap
Brush S )rocket
Washer
17