Filter
Top Products
wARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed,
i
EXHAUST FILTER
ELECTROSTATIC
The electrostatic filter must be replaced
when dirty. Reptace the filter when the
entire surface area is covered evenly.. The
filter CANNOT be washed as it will lose
its dust trapping ability.
Replacement exhaust filters are available
through Sears Service Center under part
no, 8175258. See "Requesting Assistance
or Service"
1. Puli out and up
on the exhaust filter -"-_.q __>'__K/'qb
cover to remove \ ¢._-.. tL.._"_'_
from the motor /_.=_ -'T- z
cover and lay aside (_'"_=¢#_
Always follow all safety precautions when
cleaning and servicing the Power-MateSo
3. Place the new
filter into the motor
cover with the
white side down,
Tab
".. Shot
2. When the
exhaust filter
becomes dirty,
remove it by
pulling straight up.
Exhaust
4, Reinstall the
exhaust filter
cover by insert-
ing the tab into
the slot in the
motor cover,
Press firmly to
snap exhaust fit-
ter cover into
place_
,,unnnu nnl i
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit°
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting_
14