Filter
Top Products
The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries
the dirt to the dust bag through the
airflow passages, The dust bag lets
the air pass through, while it traps
the dirt.
For best cleaning results, keep
the airflow passage open..
Check the starred areas
occasionally for clogs.
Unplug from outlet
before checking.
MO ZOT
Safety
Filter
BAG CHANGING
For best cleaning results, the dust bag
should be changed often The performance
indicator (some models) will specify when
the dust bag needs to be changed or the
airflow is blocked, NOTE: See PARTS AND
FEATURES for Bag Number,
1, Unplug cord from
wall outlet°
2. Remove hose
from canister,
3. Pull hood release
out and up, then lift
canister hood°
4. Disengage
cardboard tab from
red bag mount by
putling away and
tiffing up
5. Pull bag out of
the red bag mount.
Motor_,/ 6. Check and
Safety _////7/_// replace, if
FIIter_//////////Y/// necessary, the
Bag filter,
__._1 Mount
7. The red bag mount will flip forward after
removing bag,
& Rotate red bag
mount down and
install bag into
slots per
intructions
pushing down until
the cardboard tab "-.
locks into position
and the holes
align_ Tuck the bag
securely into the bag cavity so that none of it
is able to be pinched by the hood,
9, Replace and latch canister hood,
10. Insert hose into canister,,
11. Plug cord into wall outlet.
CAUTION
NEVER REUSE A DUST BAGoVery
fine materials, such as carpet fresh-
ener, face powder, fine dust, plaster,
soot, new carpet lint, etc. can clog
the bag and cause it to burst before
it is full and may cause damage to
vacuum motor. Change bag more
often when vacuuming these materi-
als.
12