Filter
Top Products
ATA PC Card
• To insert the ATA PC card
Insert the SanDisk ®CompactFlash that contains saved
stitch data into the SanDisk _ CompactFlash PC card
adapter.Then insert the adapter into the slot with the front
side of card (_ facing you.
Push the card until it clicks, then the eject button @ pops
out.
(_ SanDisk ®CompactFlash PC card
When the card is properly set, the red bar on the eject
button @ will show up.
Eject button
Red bar
• To eject the ATA PC card
Press the eject button _ to eject the ATA PC card.
Take out the ATA PC card from the machine.
Notes:
• Use only Sandisk _ CompactFlash128MB or smaller to
store stitch data.
• Use only Sandisk ®CompactFlash PC card adapter.
Selecting the Card Designs
After inserting a card into your machine, you can view and
select its designs in the embroidery mode.
Press the :Mod_key, then the embroidery mode key (_ to
enter the embroidery mode.
(_ Embroidery mode key
ATA PC card key
Press the ATA PC card key _. The patterns in the card are
displayed in the first page.
S
Mode
0
i
\
68