Filter
Top Products
(_ Inch/millimeter
You can set your machine's measuring unit to either
"inch" or "millimeter" depending upon your preference.
The default measuring unit setting is "inch".
Press ii" _) or m_ _ key to select the unit you
prefer.
Key position adjustment
If you think the touch panel keys are out of alignment,
you can correct it in the key position adjustment window.
When you press the Yes!key, window (A) will be shown.
With your finger, press the black + sign as it appears in
order. When you press the last black + sign, the window
(B) wilt be shown.
The window will close and go back to the original screen
with the new setting being registered.
Reset all to defaults
By press ng %S key, you can reset all the settings to their
original setting (the same settings as when you
purchased the machine).
Embroidery Set Mode
For detailed instructions on embroidery sewing please refer
to page 61.
S
(A)
KeyPositionAdjustment
END
(B)
Flag Mode-Language Selection
You can select one of the following 3 languages by pressing
the desired language key.
(_ English
French
Spanish
f
®
J
J
21