Filter
Top Products
Press the start/stop button to sew the buttonhole. The
buttonhole wilt be automatically sewn.
Step 1:
The machine will sew the front bartack and the left
row first. Then it goes back to the starting point with
straight stitch.
Step 2:
The machine will sew the right row.
Step 3:
The machine will sew the back barrack, and the
machine will stop automatically.
• To repeart buttonhole sewing
To sew another buttonhole, raise the presser foot and
move the fabric to where the next buttonhole is sewn, then
lower the foot and start the machine.
When finished, push the buttonhole lever up as far as it
will go.
Remove the fabric and place a pin just below the bartack
at each end to prevent accidentally cutting bartacks.
Cut opening with the seam ripper.
Use an eyelet puncher to open a keyhole buttonhole.
S
%
iquare BH
_ Now Sewing
Completed
RaisePresser Foot
®
%
J
38