Filter
Top Products
* To close the “Camera Display/Position Registration” screen, click the “Close” button.
(Precautions)
* In the case of VN-V686, the HOME position uses setting of the camera side.
Each value of "Pan”, ”Tilt”, and ”Zoom" cannot be set though "Position Name" can be set.
Moreover, the HOME position cannot be deleted.
Refer to "Instructions" of VN-V686 for the method of setting the HOME position of the camera side.
* In the case of VN-X35, "Digital PTZ function" is used in the camera control function.
Please select "Pattern 4/6/8" to which “digital PTZ function” of JPEG is effective by "Encode setting"
of VN-X35 when you control the camera.
When you change "Encode setting" after the position of VN-X35 is registered, the angle of field at the
position is different from the registered angle of field. In that case, please register the position again.
Refer to "Instructions" of VN-X35 for details of "Encode setting" of the camera side.
21