Filter
Top Products
[For unit types other than VN-E4]
(1)
Setting Screen for Units Other Than VN-E4
(1) IP Address
For setting the IP address of the unit.
(2) User Name (admin / operator / user)
For entering the user name for logging into the unit.
* It is displayed only for VN-V26/V686/X35.
(3) Password (Within 8 letters)
For entering the password for logging into the unit.
* Password setting is not available for VN-C20/C215/V25.
(4) Unit Name (Within 32 letters)
For entering the name of the unit.
(5) Camera Name
This is automatically set to the same name as the unit name. This name cannot be altered.
(6) Motion Detection
To use the motion detection alarm, turn on the check box.
When the check box is turned on, the name of the motion detection alarm is automatically set to
“Camera Name” + “Motion Detection”. This name cannot be altered.
* Motion detection setting is not available for VN-C30.
* For VN-C20/C215, it is necessary to set alarm of the main unit in “2.3.1 VN-C20/C215 Unit
(4)
(5)
(6)
(7)
(14)
(13)
(8)
(9)
(10)
(11)
(12)
(2) (3) (15)
15