Filter
Top Products
Alarm Setting” (to be explained later).
(7) Request Mode (Normal / High Speed)
When "High Speed" is selected, the image is acquired in the high-speed mode.
* It is displayed only for VN-C625/C655/C205.
* Please note the following points when you select "High Speed".
- The frame rate of the image transmitted from the camera to VN-RS800 reaches the value set by
"Settings"-"View settings"-"Frame Rate" of the Web Setting screen of the unit. Please set the
maximum frame rate used with VN-RS800 beforehand by the Web Setting screen of the unit.
- When the communication traffic between the camera and VN-RS800 is calculated, this
maximum frame rate is used.
- The client (VN-S400 and VR-N900, etc.) that operates the frame rate of the camera directly
exists. Please set a common frame rate when coexisting with these clients.
(8) Audio Monitor
The audio input to VN-V26/X35 that the check box is turned on can be monitored and be
recorded on the PC side.
* It is displayed only for VN-V26/X35.
(9) Send Audio
Turning on the check box, operating the “Send Audio” button on the viewer application becomes
possible. The audio input to PC can be transmitted to VN-V26/X35 by operating the “Send Audio”
button, and it output it from the audio output terminal of VN-V26/X35.
* It is displayed only for VN-V26/X35.
(10) Alarm Terminal [1 – 2]
Turning on the “Use” check box enables use of the corresponding alarm terminal.
* For VN-C20/C215 it is necessary to set alarm of the main unit in “2.3.1 VN-C20/C215 Unit
Alarm Setting” (to be explained later).
(11) Alarm Name (Within 32 letters)
For entering the name of the alarm. If the alarm name is left unspecified (blank) when the check
box in (6) is turned on, this is automatically set to “Camera Name” + “AL?” (“?” is the alarm
number).
(12) Trigger
For selecting the method for determining the alarm.
* It is displayed only for VN-V25/V26/V686/X35.
(13) Serial Terminal [1]
Turning on the “Use” check box enables use of the corresponding serial terminal.
* It is displayed only for VN-A1.
(14) Unit [TK-C676/TK-C625/TK-C655]
For selecting the unit name connected with the serial terminal.
* It is displayed only for VN-A1.
(15) Web Setting Button
For displaying the Web Setting screen of the unit.
16