Filter
Top Products
21
Blower Operation
The optional variable-speed blower will enhance heat
circulation around the firebox and out into the room.
The blower is controlled by a heat activated switch
(snapstat) that will ONLY function when the control
switch is in AUTO setting. After the fire has been
burning for a time, the snapstat will react to the heat
and activate the blower. Fan speed may be manually
adjusted with the rheostat knob. If the burner turns off,
the blower will be shut off automatically when the
stove cools down.
If automatic blower circulation is not desired, place
the blower control switch in the MANUAL position.
Figure 37. Blower Wiring Diagram
Figure 36. Blower Controls
CAUTION:
LABEL ALL WIRES PRIOR TO DISCONNECTION
WHEN SERVICING CONTROLS. WIRING ERRORS
CAN CAUSE IMPROPER AND DANGEROUS
OPERATION.
VERIFY OPERATION AFTER SERVICING.
ATTENTION:
Au moment de l’entrentien des commandes,
etiquietez tous le fils avant le debranchement.
es erreurs de ceblage peuvent entra tun
fonctionnement inadequat et dangereux.
SNAPSTAT
BR
BK
W
G
BLOWER
POWER
SUPPLY
GY
BK
RHEOSTAT
BK
BK
BK
BL
SWITCH
MANUAL OFF AUTO
GY
BR
P
P
BK
W
G
P
P
P
BL BK
P = QuickConnector Pin
Wingscrew
Male
Quickconnector
to Female
Quickconnector
Snapstat
Connectors
Figure 35. Attach Blower to the Mounting
Bracket with the wingscrew and connect
wires to Snapstat and female control
quickconnect.
BLOWER
BURNER
AUTO
TSTAT
MAN
O
F
F
ON
Speed
Control
Manual or
Automatic
Modes