Filter
Top Products
45
1
2
3
4
5
1
2
4
4
5
3
6
5
8
7
11
11
9 10
CARE AND MAINTENANCE
Cleaning the Hook Race and Feed Dog
Turn the handwheel to raise the needle, and then
unplug the sewing machine.
NOTE:
Do not dismantle the machine other than what is
explained on this page.
1 Remove the setscrews with the screwdriver supplied
with the machine. Remove the needle plate.
2 Lift up the bobbin holder and remove it.
1 Screwdriver
2 Setscrews
3 Needle plate
3 Clean the bobbin holder with a lint brush.
4 Clean the feed dog and hook race with the lint brush.
4 Bobbin holder
5Lint brush
5 Clean the hook race with a dry cloth.
(You may also use a vacuum cleaner.)
7 Hook race
8 Soft dry cloth
Assemble the hook race
1. Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
9 Knob
10 Stopper
2. Insert the bobbin.
3. Reattach the needle plate, aligning the needle plate
guide pins with the guide holes on the needle plate
and tighten the screw.
11 Needle plate guide pins
NOTE:
After cleaning the machine, make sure the needle and
presser foot are attached.