Filter
Top Products
17
Setting the Fabric in an Embroidery Hoop
1 Mark the centerlines on the right side of the
fabric with tailor’s chalk.
1 Fabric
2Centerlines
2 Loosen the hoop tightening screw of the outer
hoop and lay the fabric and the inner hoop over
the outer hoop.
3 Place the template over the fabric, matching
centerlines.
4 , 5 Set the inner hoop into the outer hoop and
tighten the hoop tightening screw.
3 Hoop tightening screw
4 Inner hoop
5 Template
6 Outer hoop
6 Remove the template.
NOTES:
When placing the fabric on the embroidery hoop,
place the outer hoop on a flat surface.
For thin and stretchy fabrics use an adhesive
type stabilizer (iron-on type) on the wrong side of
the fabric. More than one layer may be required.
The Cloth Setter 10000 (optional Item) is very helpful
when setting a fabric to a hoop in the right position.
1
1
2
2 3 4
3
4
5
6
3
5
5
6