Filter
Top Products
10
3 Slip the thread through the slit and down into the
eye of the take-up lever as shown. Draw the
thread down through the left channel.
4Slit
5 Eye of the take-up lever
4 Slip the thread behind the lower thread guide
from the right.
5 Lower thread guide
5 Slip the thread in the needle bar thread guide
from the left.
6 Needle bar thread guide
Thread the needle from front to back by hand or use the
built-in needle threader.
NOTE:
Refer to page 11 for built-in needle threader
3
4 5
5
4
5
6