Intel 0.9 Smoke Alarm User Manual


 
Intel ATX Power Supply Design Guide
Version 0.9
Page 7
2. Applicable Documents
The latest revision in effect of the following documents forms a part of this document to the
extent specified.
AB13-94-146 EACEM European Association of Consumer Electronics Manufacturers.
Hazardous Substance List / Certification.
ANSI C62.41-1991 IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Circuits.
ANSI C62.45-1992 IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage AC
Power Circuits.
MIL-STD-105K Quality Control.
MIL-STD-217F Reliability Predictions for Electronic Equipment.
MIL-C-5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys.
CSA C22.2 No.234, Level 3 Safety of Component Power Supplies. Intended for use with Electronic Data
Processing Equipment and Office Machines.
CAN/CSA C22.2 No.950-95,
3
rd
edition
Safety of Information Technology Equipment including Electrical Business
Equipment.
UL 1950 without D3 Deviation,
3
rd
edition
Safety of Information Technology Equipment including Electrical Business
Equipment.
IEC 950 plus A1, A2, A3, A4 Safety of Information Technology Equipment including Business Equipment.
EN60 950 plus A1, A2, A3, A4 Safety of Information Technology Equipment including Business Equipment.
EMKO-TSE (74-SEC) 207/94 Nordic National Requirement in addition to EN60950.
CISPR 22 and EN 55022 Limits and Methods of Measurements of Radio Interference Characteristics of
Information Technology Equipment, Class B.
ANSI C63.4 – 1992 American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the
Range of 9 kHz to 40 GHz for EMI testing.
EN50082-1 (1992) Electromagnetic compatibility/generic immunity standard.
EN61000-3-2 Limits for Harmonic Current Emission, Class D.
Japan Electric Association Guidelines for the Suppression of Harmonics in Appliances and General Use
Equipment.
IEC801- / IEC1000-4- Electromagnetic compatibility for industrial-process measurement and control
equipment.
Part -2: ESD Requirements.
Part -3: Immunity to Radiated Electromagnetic Fields.
Part -4: Electrical Fast Transients/Burst Requirements.
Part -5: Surge Immunity Requirements.
IEC Publication 417 International Graphic Symbol Standard.
ISO Standard 7000 Graphic Symbols for Use on Equipment.
CFR 47, Part 15, Subpart B FCC Rules.
PrEN 50082-1: 1995 Electromagnetic compatibility, generic immunity.
Standard, Part 1: Residential, commercial and light industry.
ENV 50140 Radio frequency electromagnetic field test standard, Amplitude modulated.
ENV 50204 Radio frequency electromagnetic field-test standard, Keyed carrier.
ENV 50141 Radio frequency common mode test standard.
EN 61000-4-11 Voltage dips and interruptions test standard.