Filter
Top Products
9
68” METAL AND GLASS TV STAND
www.insigniaproducts.com
Step 5: Attaching the top frame
• Align the screw holes in the tabs on the ends of the top frame (R) with the screw holes on the inside top of the
front support (A). Insert short screws (M) through the screw holes on the tabs and into the screw holes on the
front support (A). Use the Allen wrench (Q) to tighten the screws.
Make sure that these
screw holes face up.
You’ll need:
M (4)
Q (1)
NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 9 Wednesday, April 30, 2014 3:29 PM