Filter
Top Products
13
68” METAL AND GLASS TV STAND
www.insigniaproducts.com
Step 9: Installing the middle shelf
1 From the front of the stand, slide the middle shelf (I) into the shelf bracket on the rear support panel (F). Make
sure that the screw holes in the middle shelf face the front of the stand and the black screw caps on shelf face
down.
2 From the underneath of the middle shelf (I), insert medium screws (L) through the screw holes on the middle
shelf and into the screw holes on the bottoms of the pillar supports (H). Use the Allen wrench (Q) to tighten the
screws.
3 Insert clamp screws (P) into the two holes on the bottom of the shelf bracket, then use the Allen wrench (Q) to
tighten the clamp screws (P).
You’ll need:
L (2)
Q (1)
P (2)
NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 13 Wednesday, April 30, 2014 3:29 PM