Filter
Top Products
10
68” METAL AND GLASS TV STAND
www.insigniaproducts.com
Step 6: Attaching the rear support panel
•Insert long screws (N) through the screw holes on the rear support panel (F) and into the screw holes on the top
frame (R) and back base (C). Use the Allen wrench (Q) to tighten the screws.
You’ll need:
N (4) Q (1)
NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 10 Wednesday, April 30, 2014 3:29 PM