Filter
Top Products
8
68” METAL AND GLASS TV STAND
www.insigniaproducts.com
Step 4: Attaching the left and right bases to the front support
• Slide the ends of the left base (C) and right base (E) into the openings on the front support (A). Make sure that the
two screw holes on the bottom of each base and the screw hole on the side of each base align with the screw
holes in the front support frame (A). Insert a short screw (M) through each of the six screw holes (three holes on
each base), then use the Allen wrench (Q) to tighten the screws.
You’ll need:
M (6)
Q (1)
NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 8 Wednesday, April 30, 2014 3:29 PM