Filter
Top Products
37
4
AP-12 MANAGER
4
■ MAC security
Sets MAC address security function.
This function can only be set when the access point mode or Bridge mode C is
selected.
Turns the MAC security ON and OFF. (“✓” mark
appears when set to ON.)
(default: OFF)
When the Mac security is turned ON, the wireless
devices to which a MAC address is registered only can
access the AP-12.
Up to 40 MAC addresses can be registered.
Displays the contents of the settings.
Deletes all registered MAC addresses.
Click <Remove A
ll > then <Apply>, when deleting all
settings.
q Enable mac security
………………………
w Refresh ……………
e Remove All ………
q
w
e
Click <OK> or <Apply>
to register the setting.
AP-12_USA 02.7.26 9:32 AM Page 37 (1,1)