Filter
Top Products
18
FIXED IP ADDRESS SETTING
3
y Click the desired access point name you want to set up, then click <Next>.
• The default IP address is [192.168.0.1]. However, once the AP-12 has been con-
nected to a LAN with a DHCP server, a different IP address may be obtained.
3-2 Using [Easy Setting Wizard] (continued)
t Click <N
ext> to start searching the AP-12.
When no access point is found:
When the error dialog “Cannot connect to the access
point” appears after approx. 30 sec.
➥ Check the connection between the AP-12 and the PC.
(p. 16)
➥ The network part may be different between the AP-12 and the PC in case the
access point has been used with the fixed IP address. Refer the Chapter 7-4 (p.
61) in such a case.
Click
Click
2.
Click1.
The IP address
of the AP-12 ap-
pears.
AP-12_USA 02.7.26 9:32 AM Page 18 (1,1)