Filter
Top Products
19
3
FIXED IP ADDRESS SETTING
3
u When the PC cannot access the AP-12 due to a network address difference
between them, the following screen appears.
Enter the desired unique host address for the PC, then click <Next>.
• When the PC can access the AP-12, the screen described in step !2 appears.
• The default IP address of the AP-12 is “192.168.0.1”.
• Enter a value other than “1” in the address box.
DD
About IP Address
The IP addresses consist of two ele-
ments, network part and host address.
For example, “192.168.0.1” (default IP
address of the AP-12; class C) has
the network part “192.168.0” and host
address “1”. Network devices, such as
the PC, with the same network part
are recognized in the same network,
and the each device is distinguished
by the host address. Pay attention to
the notes at right when obtaining IP
addresses.
• Assign the same network to the all
network devices in the same group.
• Assign an unique host address for
each device in the same group.
• NEVER assign a “network address”
(host address is 0 or starting from 0.)
• NEVER assign a “broadcast address”
(host address is 255).
Click
2.
Enter
1.
AP-12_USA 02.7.26 9:32 AM Page 19 (1,1)