Filter
Top Products
67
7
REFERENCES
7
DD
Connection to the router type modem
[Procedure]
q Connect the AP-12 and the router type modem using the supplied patch cable.
w Connect the AC adaptor to turn the AP-12 power ON.
• The [POWER] indicator and the LAN indicator lights.
• The [Wireless LAN] indicator flashes.
* Check the Ethernet cable connection and type if the LAN indicator does not light.
e Start the PC and obtain an IP address from the modem automatically.
DC Ethernet
MDI MDI-X
INTERNET
DSL
/CATV
Router Type Modem
Patch cable
(supplied)
Wireless LAN card
AP-12
Wireless LAN card
Connect the AC adapter after the
Ethernet cable is connected and then
turning the modem power ON.
When communication has failed.
Turn the AP-12 power OFF. After waiting a few seconds, turn the power ON again.
Then check the wireless terminal’s IP address using [AP-12 Manager].
See the Chapter 7-5 (p. 64) for IP address confirmation.
AP-12_USA 02.7.26 9:33 AM Page 67 (1,1)