Filter
Top Products
17
3
3-2 Using [Easy Setting Wizard]
Changing the PC’s IP address is necessary using [Easy Setting Wizard] when set-
ting up the AP-12. [Easy Setting Wizard] is contained in the utility CD and it allows
easy setting for changing the IP address.
[Procedure]
q Quit all applications when Windows is running.
w Insert the CD into the CD-ROM drive.
The Auto Run function will be activated
and the main menu will appear on the
screen as at right.
If the main menu does not appear,
double-click the “AutoRun.exe” con-
tained in the CD.
e Click [Easy Setting Wizard].
r Click <N
ext>.
FIXED IP ADDRESS SETTING
3
DD
About [Easy Setting Wizard]
[Easy Setting Wizard] enables the PC
to access the AP-12 temporarily with-
out changing the PC’s IP address.
The wizard searches for both the AP-
12 and PC’s address settings automat-
ically.
When the PC is unable to access to the
AP-12, the wizard assigns a tentative
IP address to the PC.
The original IP address remains, there-
fore, the PC can be used in the previ-
ous setting condition after the AP-12
set-up.
• [Easy Setting Wizard] can be started
up from the supplied CD drive only.
(Unable to install.)
• When a new network is built, the IP
address of the PC using the AP-12,
must be changed.
Refer to Chapter 6 (p. 51) for details.
Click
AP-12_USA 02.7.26 9:32 AM Page 17 (1,1)