Filter
Top Products
Step 9B. Attaching the Light Fixture
Plug the upper and lower plug connectors together. See Figure
9C. The connectors are keyed and will only go together one way.
Before assembling the light fixture to the fixture fitter locate the
arrow shaped hole positioned directly behind one of the (3)
screw clearance holes on the outside flange of the light fixture.
See Figure 9D.
Align the arrow in the light fixture with the arrows previously
used to align the fan trim and fixture fitter. See Figure 9D.
Attach the light fixture to the fixture fitter using (3) 3/8" long
Phillips round head screws with lockwashers. See Figure 9C.
Tighten the screws securely.
CAUTION: Failure to securely tighten the (3) assembly screws
could result in the light fixture falling.
Install (2) candelabra base lamps. Refer to maximum wattage
label on light fixture for maximum lamp wattage.
B. The (8) sides of the fitter must be aligned with the matching
(8) sides of the fan trim. To orient the fitter locate the (3) arrow
shaped holes near the outer edges of the fitter. See Figure 9.
Select the arrow which has a screw hole directly behind it, and
align this arrow with the arrow in the trim. See Figure 9.
Step 9A: Installing the Fixture Fitter
Thread the upper plug connector from the motor through the
large hole in the center of the fitter. See Figure 9A.
Check the (3) elongated slots in the top of the fitter to see if they
are aligned with the (3) mating screw holes in the fitter mounting
plate. If any of the screw holes in the mounting plate are covered
by the fitter, rotate the fitter ninety degrees either direction to
allow access to the (3) mounting holes in the mounting plate.
See Figure 9B.
Assemble the fitter to the fitter mounting plate using (3) 3/8"
long Phillips round head screws with lockwashers. See Figure
9A. Tighten the (3) screws securely.
CAUTION: Failure to securely tighten the (3) assembly screws
could result in the light fixture falling.
41225-01 10/95 - 5 - ©1995 HUNTER FAN CO.™
ARROW SHAPED HOLE
SCREW HOLE
ASSEMBLY
SCREWS
ELONGATED
SLOTS
FIXTURE FITTER
FITTER MOUNTING PLATE
UPPER PLUG
Figure 9. Fixture Fitter
FIXTURE
UPPER PLUG CONNECTOR
LOWER PLUG
ASSEMBLY
SCREWS
LIGHT
FIXTURE
LIGHT FIXTURE
ARROW
FIXTURE FITTER
ARROW
FIXTURE TRIM ARROW
Figure 9C
Figure 9A
Figure 9B
Figure 9D