Hunter Fan 45007 Fan User Manual


  Open as PDF
of 15
 
9
45007-01•11/02/07•HunterFanCompany
6-1.Partiallyinstalltwocanopyscrews(about2fullturns)inthe
hanger bracket.
6-2.Raisethecanopyoverthehangerbracket.Alignpartiallyinstalled
screws with key slots in canopy.
6-3. Twist canopy clockwise to secure.
6-4. Install third & fourth canopy screw in round hole on canopy.
Securely tighten all four screws.
6-5. Usingbothhands,pushthecanopytrimringuptothetopofthe
canopy.
6-6. Twist canopy trim ring clockwise to secure the canopy.
Should you need to remove the canopy
trim ring, follow these steps:
1. Twist canopy trim ring
counterclockwise until it releases
from canopy.
Steps 6-1 – 6-2
Canopy Trim
Ring
Canopy
HangerBracket
Step 6-3
Canopy
Screw
Step 6-4
Step 6-5
6 • Installing the Canopy and Canopy Trim Ring
 previous next