Hunter Fan 45007 Fan User Manual


  Open as PDF
of 15
 
11
45007-01•11/02/07•HunterFanCompany
YourHunterfancomeswithanintegratedlightxtureassembly.
WARNING:Useonlythelightxturesuppliedwiththisfanmodel.
8-1. To attach the heat shield assembly, partially install two housing
assembly screws into the switch housing mounting plate.
8-2. Feedtheupperplugconnectorthroughthecenteropeningofthe
shield.
8-3. Alignthekeyholeslotsinthehousingwiththeassemblyscrews.
8-4. Turn the housing counterclockwise until the housing assembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining screw into the housing. Tighten all three
screws firmly.
CAUTION: Make sure the heat shield assembly is securely
attached to the housing mounting plate. Failure to properly attach
and tighten all three assembly screws could result in the heat shield
assembly and light fixture falling.
Steps 8-1 – 8-4
Assembly
Screw
Heat
Shield
Assembly
8 • Completing Your Installation With a Bowl Light Fixture
 previous next