Hunter Fan 45007 Fan User Manual


  Open as PDF
of 15
 
7
45007-01•11/02/07•HunterFanCompany
4 • Setting the Remote Transmitter and Receiver
CAUTION: e remote control device complies with part 15 of the FCC rules.
ChangesormodicationsnotexpresslyapprovedbyHunterFanCompanycouldvoid
your authority to operate this equipment.
Operationissubjecttothefollowingtwoconditions:
1. is device may not cause harmful interference.
2.isdevicemustacceptanyinterferencereceived,includinginterferencethatmay
cause undesired operation.
WARNING:UseonlytheHunterFanspeedcontrolsuppliedwiththisfan.
4-1. IMPORTANT! Before you change the DIP switch settings, make
sure the battery is not connected to the transmitter.
Change the position of the DIP switches in the remote transmitter
and the receiver. Make sure that the DIP switches match in
theremotereceiverandtransmitter.Iftheydon’tmatch,the
transmitter will not function.
4-2. ereisatoggleswitchbesidetheDIPswitchesonthetransmitter.
Move the toggle switch toward the side that reads “CFL” if you are
going to operate the fan with CFL bulbs. Move the switch to the
“INC” side if you are going to use incandescent bulbs.
4-3. Install the included 9-volt battery into the transmitter.
Setting DIP switches
When two or more fans are located near each other, you may desire
to have the receiver/transmitter for each fan set to a different code,
so that the operation of one fan does not affect the operation of the
other fans.
e DIP switches for the receiver are located on the flat surface of the
receiver. e DIP switches for the transmitter are in the the battery
compartment.
ReceiverDIP
switches
Transmitter DIP switches
CFL INC
Dip Switches
Set to 01110
Dip Switches
Set to 01001
Dip Switches
Set to 01110
Dip Switches
Set to 01001
Receiver1
Receiver2
Transmitter2Transmitter 1
Example DIP Switch Settings
DIP Switches
Set to 0111
DIP Switches
Set to 0100
DIP Switches
Set to 0100
DIP Switches
Set to 0111
4 • Setting the Remote Transmitter and Receiver
 previous next