Hunter Fan 42775-01 Manual

next previous

42775-01•04/29/08•HunterFanCompany

Steps 3-2 – 3-3

Downrod

Canopy

TrimRing

Set Screw

3-1. Unbundlethewiresfromthefan.

Note: YourHunterfancomeswithanoptionaldownrodextension

pipe. If you are hanging the fan on a ceiling higher than 10 feet tall

and you would like to use the enclosed optional downrod, follow

Steps3-9– 3-13 on the next page.

WARNING: Fan may fall if not assembled as directed in these

installation instructions.

For Standard or Angled mounting:

3-2. To assemble fan to hang down from a ﬂat or angled ceiling, insert

the downrod through the canopy and canopy trim ring. Feed the

wires from the fan through the downrod.

3-3. Loosen the square head set screw on the adapter to install the

pipe and ball assembly. Note: When the pipe and ball assembly

isfullyinstalled,2-3threadsonthepipewillstillbevisible;thisis

normal. Securely retighten the set screw with a wrench or pliers.

CAUTION: e adapter has a special coating on the threads. Do

notremovethiscoating;thecoatingpreventsthedownrodfrom

unscrewing.Onceassembled,donotremovethedownrod.

3-4.Raisethefanandplacethehookontheceilingplatethroughthe

U-shapedholeintherim.

Canopy

Step 3-4

3 • Assembling and Hanging the Fan

U-shaped

Hole