Hunter Fan 42775-01 Manual

next previous

42775-01•04/29/08•HunterFanCompany

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

8-17. Touninstallthelightxture,rstdisconnecttheplugconnectors

between the black wire and the black/white wire.

8-18. Disconnecttheplugconnectorsbetweenthetwowhitewires.

8-19. Removethetwoscrewsattachingthelightkittothelower

switch housing.

8-20. Removethelightxturefromthelowerswitchhousing,pulling

disconnected wires through the hole in the center of the lower

switch housing.

Note: When removing the wires, pull the thin plug connector

(male) through ﬁrst, and then pull the other plug connector

(female) through the hole.

8-21. Installthedummyterminals(includedinthesackparts)onthe

two disconnected wires in the lower switch housing.

8-22. Installtheswitchhousingcapandplugbuttontothelower

switch housing.

8-23. Onceyouhaveuninstalledthelightxture,continue

 withstep8-6.

Male Dummy

Terminal

Female Dummy

Terminal

Step 8-22

Cap

Plug Button

Step 8-19

Lower Switch

Housing