Hunter Fan 42775-01 Manual

next previous

42775-01•04/29/08•HunterFanCompany

Steps 7-1 – 7-2

7-1. If you are using one of the enclosed downrods, it is now time

for you to activate the Perfect Balance

system by removing the

veredretainingscrews.Rotatethebladesslowlyuntiloneofthe

red retaining screws is visible through the notch in the mounting

plate.Removetheretainingscrewfromthebottomofthefan

housingusingascrewdriver.Repeatthisprocessforall5retaining

screws.

Note: Aftertheretainingscrewsareremoved,thebladeswillfeelloose.

is is normal, as loose blades are a characteristic of the Perfect

Balance

system.

7-2. If you are using a downrod longer than 6 inches, leave the

retaining screws in their place and continue the installation

process.

Notch

SwitchHousing

Mounting Plate

RedRetaining

Screws

7 • Activating Perfect Balance