Hunter Fan 42775-01 Manual

next previous

42775-01•04/29/08•HunterFanCompany

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

8-8. FirstinstallB10candelabrabulbs(60WattMaximum)intothe

sockets.

8-9. Ifthefandangleisattachedtotheextrapullchain,removeitnow.

8-10. Attachtheextrapullchain(included)tothefanpullchainusing

the plastic breakaway connector. (You may ﬁnd the plastic

breakaway connector on the end of the extra chain.)

8-11. readthefanpullchainthroughtheholeinthemetaldisc.en,

thread the fan pull chain through the hole in the center of the glass

bowl.

8-12. readthelightpullchainthroughtheholeinthecenterofthe

glass bowl. en, read the light pull chain through the hole in

the center of the cover plate.

8-13. readthefanpullchainthroughthegrommetholeinthesideof

the cover plate.

8-14. Placethecoverplateupagainstthe

glassbowl.Aligntheholesinthecover

plate and glass bowl.

8-15. readthelightpullchainthrough

the ﬁnial and screw the ﬁnial onto the

threaded rod end until tight.

8-16.Reattachthefandangletotheextrapull

chain.

Breakaway

Connector

Light Bulb

Sockets

(B10

Candelabra-

Based 60 Watt

Maximum)

MetalRod

Metal Disc

GlassBowl

Cover Plate

Finial