Hunter Fan 42775-01 Fan User Manual


  Open as PDF
of 18
 
10
42775-01•04/29/08•HunterFanCompany
BladeAssembly
Screw
Step 6-1
Grommet
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attacheachbladetoabladeironusingthreebladeassembly
screws. If you used grommets, the blades may appear slightly
loose after screws are tightened. is is normal.
6-3. Loosen the blade iron armature screws that are holding the
shipping bumpers in place. Push the shipping bumpers in, then
lift them off.
6-4. Slide the blade irons onto the blade iron armature screws.
Tighten the blade iron armature screws as tight as possible with a
screwdriver.
Step 6-3
Blade Iron
ArmatureScrews
Shipping
Bumper
Steps 6-1 – 6-2
BladeAssembly
Screw
Grommet
Blade
Blade
Iron
Blade Iron
Armature
Screw (tighten
securely)
6 • Assembling the Blades
 previous next