Filter
Top Products
User Code Setup (cont'd)
38
SCREEN ACTION
10. If this user is assigned an RF button
zone, touch the box below the RF Button
Zone. The "RF Button Zone " screen is
displayed with the instructions to enter 2
or 3 digits based on the alarm system
being used. Enter the RF Button Zone
number that was previously programmed
in the control panel. Note that the RF
Button Zone does not appear for every
user.The User Options screen will be
redisplayed.
11. Press the SAVE button. The system
will save the configuration. When the
save is complete, the User Setup screen
is displayed with the new user’s name
shown.