Filter
Top Products
Security System Operation (cont'd)
28
How to Send Emergency Messages
• Emergency messages are optional and may not be available on your
system. Ask your system installer if emergency messages are
available on your system.
• The Emergency screen cannot be accessed while running a screen
diagnostic test or while in the clean screen mode.
An emergency message for fire, panic, or medical can be sent to the
central monitoring station from the Emergency screen. The
Emergency screen can be accessed by activating the "PANIC" Icon
located on the lower right corner of the screen.
Once the Emergency screen is accessed, perform the following to
send an emergency message.
SCREEN ACTION
On the Emergency screen press and hold
(for at least 2 seconds) the associated
alarm button for the type of emergency
message you want to send (FIRE, PANIC,
or MEDICAL). When the message is
sent, the associated "Message Sent"
statement is displayed in the text box to
the right of the buttons. You are
immediately returned to the screen from
which you pressed the “PANIC” Icon.