Filter
Top Products
System Overview (cont'd)
12
Note that this is a limited mode of operation. While in this mode:
• You can use the Security button to access the Console Emulation
Mode of operation to try to clear your faults, disarm the system, or
enter additional Alpha Keypad commands specified in you panel
User Guide. You can perform almost all functions that you can
perform from a standard non-graphic alpha keypad.
• You can depress the “Panic” key and generate Emergency
Messages as defined in the panels home partition for this
TouchCenter.
• The Armed and Ready LEDs on the front of the TouchCenter will
indicate the TouchCenter’s home partition status. The Message
LED is not active in the Safe Mode.
• The Chime mode will function in the Safe Mode: however, you will
not have Voice, Voice Chime, or Message capability.
• When in Safe Mode, the lock on the Security button on the Home
screen will always be shown in the unlocked position. Refer to the
Armed LED for the true armed status of your system.
• When an alarm occurs in the Safe Mode, it is displayed on the
Console mode screen only. It will not be shown on the Home screen.
To Exit the Safe Mode:
1. Press the ! SAFE MODE ! bar. You will be presented with the
following popup message:
2. Select “Yes” to return to the Normal Mode of operation. The
TouchCenter will reset and normal operation will return as long as
the original conditions that caused the entry into Safe Mode do not
still exist.