Filter
Top Products
– 30 –
Bypassing Protection Zones (cont’d)
Quick Bypass
Your system allows you to easily bypass all open (faulted) zones without
having to enter zone numbers individually.
NOTE: All bypasses are removed when an OFF sequence (security code plus
OFF) is performed.
To use the Quick Bypass feature:
BYPASS
1. Enter your security code and press 6 then press # .
2.
BYPASS 007 FRONT
UPSTAIRS BEDROOM
Typical bypass message
In a few moments, all open zones will be
displayed along with the word BYPASS. Wait
for these zones to be displayed before arming.
Arming the system before bypassed zones are
displayed eliminates all bypasses.
3.
DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad
displays the "ready" to arm message. Bypassed
zones are unprotected and will not cause an
alarm when violated while your system is
armed.
Viewing Bypassed Zones
The system allows you to view bypassed zones that are presently bypassed
regardless of the status of the partition (armed, disarmed, etc.). To view
bypassed zones.
1. Enter your security code + # + 84.
2. All zones presently bypassed are automatically scrolled for display.