Filter
Top Products
Heat & Glo • Bravo • 704-902 Rev. E • 7/0820
CAUTION
Sharp Edges
• Wear protective gloves
and safety glasses dur-
ing installation.
The diagram shows how to properly position, level, and
secure the appliance (see Figure 7.1). Nailing tabs are pro-
vided to secure the appliance to the framing members.
• Place the appliance into position.
• Level the appliance from side to side and front to
back.
• Shim the appliance as necessary. It is acceptable to use
wood shims.
• Bend out nailing tabs on each side.
• Keep nailing tabs fl ush with the framing.
• Secure the appliance to the framing by using nails or
screws through the nailing tabs. Holes are provided in the
basepan (inside the hearth) for securing to the fl oor.
A. Securing and Leveling the Appliance
WARNING
Fire Risk.
• Prevent contact with sagging, loose
insulation.
• Do NOT install against combustible
materials such as exposed insulation,
plastic and insulation backer.
WARNING
Fire Risk.
• ALWAYS maintain specifi ed
clearances around the appliance.
• Do NOT notch into the framing around the appliance spacers.
Failure to keep insulation, framing or other material away
from the appliance may cause fi re.
Figure 7.1 Proper Positioning, Leveling and Securing
of an Appliance
NAILINGTABS
(BOTH SIDES)
7
7
Appliance Preparation