Filter
Top Products
Heat & Glo • Escape-36DV • 2012-900 • Rev. AA • 04-08 37
LOG #4
(SRV2012-162):
Place log #4 on top of the burner in
front of log 3. The triangle shaped
groove in the bottom fi ts onto the
right tine of the grate. The right side
is pushed back until it touches the
back log. The left end of the log is
moved back until it almost covers the
burner ports behind it. Do NOT cover
the burner ports.
3
3
LOG #3
(SRV2012-161):
Place log #3 onto the back of the
burner. The log sits on the bend up
tabs and top of the burner surface.
The back of the log is pushed up
against the back metal wall of the
burner and the left end of the log is
fl ush with the left edge of the metal
wall. Log #1 and #2 are not shown
for clarity.
LOG #2
(SRV569-705):
Place log #2 on the left side of the
burner resting on top of log #1, the
grate tine, and on top of the pilot
bracket. The log will rest touching
the side of the fi rebox. The purpose
of this log is to help disguise the pi-
lot. Do NOT have the log touching
the pilot or pilot operation may be af-
fected.
2
2
3
3
FLUSH END
4
4