Filter
Top Products
Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12
20
Fire Risk.
• Follow these instructions exactly.
• Facing materials must be installed properly to
prevent fi re.
• No materials may be substituted without
authorization by Hearth & Home Technologies.
WARNING
• Use regular sheetrock screws in non-shaded areas.
• Use a wet or dry towel or soft brush to remove dust or
dirt from facing material.
• Apply a non-combustible adhesive to attach tile,
stone or other non-combustible fi nishing materials per
manufacturer’s instructions.
Figure 7.6 Complete Installation of Non-combustible Facing
Material
37.9"
31.7"
Figure 7.7 Attaching Non-combustible Facing Material
NON-COMBUSTIBLE
ZONE
NON-COMBUSTIBLE FACING MATERIAL
SUPPLIED LEFT SIDE OF APPLIANCE
B. Installation of Non-combustible Facing
Material
The non-combustible assembly is located on the left side
of appliance.
• Remove and save two screws from upper bracket.
• Remove non-combustible pieces.
• Remove and save two screws from lower bracket.
• Discard brackets.
• Replace screws in holes where brackets were attached
to appliance.
• Attach non-combustible panel to appliance and framing
with supplied screws. See Figures 7.6, 7.7 and 7.8.
Handle with care.
• Non-combustible material may be damaged if dropped.
CAUTION