Filter
Top Products
Heat & Glo • SL-550 / 750 / 950TR-E • 2118-900 Rev. L • 11/0820
5
5
Framing and Clearances
A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
Figure 5.1 Appliance Locations
K
C
A
L
F
I
B
G
E
D
J
J
G
A
F
C
A
H
M
N
Models A B C D
E
Min.
F
Min.
GH IJKLMN
SL-550TR-IPI-E
SL-550TR-E
in. 42 37 59-1/2
See Section
5.D for Alcove
Installation
1 1/2 44 62-1/4 16-1/4 48-1/2 68-3/4 15-1/16 7-1/2 7-1/8
mm 1067 940 1511 25 13 1118 1581 413 1232 1746 383 191 181
SL-750TR-IPI-E
SL-750TR-E
in. 45-1/2 42 64-3/8 1 1/2 45-1/2 64-3/8 16-1/4 48-1/2 68-3/4 16-5/8 7-1/2 9
mm 1156 1067 1635 25 13 1156 1635 413 1232 1746 422 191 229
SL-950TR-IPI-E
SL-950TR-E
in. 50-1/2 49 71-1/2 1 1/2 50-1/2 71-1/2 16-1/4 50-1/2 71-1/2 19-1/2 9-1/4 11-5/8
mm 1283 1245 1816 25 13 1283 1816 413 1283 1816 495 235 295