Filter
Top Products
Heat & Glo • Everest • 750-900 Rev. o • 10/08
19
Figure 17. Trapezoid Termination Cap
7-1/4 in.
(184 mm)
!
WARNING: VENTING TERMINALS SHALL
NOT BE RECESSED INTO A WALL OR SIDING.
VENT TERMINATION CLEARANCES MUST BE
FOLLOWED TO AVOID FIRE DANGER. SEE
VENT TERMINATION MINIMUM CLEARANCES
DIAGRAM ON FOLLOWING PAGE.
C. Vent Termination
Refer to Cinch Pipe and Termination Cap installation in-
structions.
WARNING: THE TERMINATION CAP MUST
BE POSITIONED SO THAT THE ARROW IS
POINTING UP.
!