Filter
Top Products
2
Heat & Glo • 6000TRSI-AUC • 2078-900 Rev. G • 12/06
IMPORTANT: Read all instructions carefully before starting installation.
Failure to follow these installation instructions may result in a possible fire
hazard and will void the warranty. Save this manual for future reference.
MODEL 6000TRSI-AUC
IS AUSTRALIAN GAS ASSOCIATION
APPROVED FOR NATURAL GAS OR PROPANE
AS A BALANCED FLUE HEATER.
Refer to the appliance data plates for gas consump-
tions and pressures.
Installation of this appliance should only be carried
out by an authorized person in accordance with the
manufacturers instructions. All relevant codes and
regulations laid down by the gas fitting authorities,
municipal building regulations, electrical wiring regu-
lations, and the requirements of the AGA Gas In-
stallation Code must be observed.
This appliance and its components are tested and
safe when installed in accordance with this Installa-
tion Manual. Report to your dealer any parts dam-
aged in shipment, specifically check glass condi-
tion. The gas logs and flue system components are
in separate packages. Read all instructions before
PLEASE READ THIS MANUAL BEFORE INSTALLING AND
USING THIS APPLIANCE.
starting installation and follow these instructions
carefully during installation to ensure maximum ben-
efit and safety. Failure to follow them will void your
warranty and may present a fire hazard.
The Heat & Glo warranty will be voided by, and Heat
& Glo disclaims any responsibility for the following
actions:
• Installation of any damaged heater or flue sys-
tem component
• Modification of the heater or balanced flue sys-
tem installation other than as instructed by Heat
& Glo.
• Improper positioning of the gas logs or the glass
door
• Installation and/or use of any component part
not manufactured or approved by Heat & Glo,
not withstanding any independent testing labo-
ratory or other party approval of such compo-
nent part or accessory.
Heat & Glo, a brand of Hearth & Home Technologies, Inc.
20802 Kensington Blvd., Lakeville, MN 55044, USA
Copyright 2006 • Printed in U.S.A.
Heat & Glo Quality Systems
registered by SGS ICS